Description

The Gates CDX belt is perfect for long-distance and off-road riding. It is 12 mm wide and consists of strong carbon fibre strands, a weather-resistant polyurethane body and a nylon running side. The back of the belt is ribbed for better dirt repellency.

Guidelines for Replacing E-bike Components:

Before you replace components on your e-bike, please read through the guidelines for component replacement for CE-marked e-bikes/pedelecs with pedal assistance.

Specifications:

Application:
City & Touring, All Mountain, Cross Country
Width:
12 mm

Technical Information:

Length:
1188 mm, 1221 mm, 1243 mm, 1265 mm, 1298 mm, 1320 mm, 1342 mm, 1375 mm, 1408 mm, 1430 mm, 1452 mm, 1507 mm, 1573 mm, 1661 mm, 1738 mm, 1826 mm, 1848 mm, 1914 mm
Tooth division:
11 mm
Material:
Polyurethane, Carbon, Nylon

Compatibility:

  • CDX Belt Drive Sprockets
  • CDX:EXP Belt Drive Sprockets

Features:

  • CDX level: high-end version for high loads and best performance
  • suitable for mud, sand, snow and ice as well as all roads
  • middle guide groove (CenterTrack)
  • high mileage
  • weather-resistant and wear-resistant polyurethane
  • carbon fibre tension members
  • wheel-optimised tooth profile
  • ribbed strap back
  • nylon running side

Technology:

Gates Carbon Drive System
The main advantages of the Gates Carbon Drive system are cleanliness, smoothness and robustness. Urban commuters as well as mountain bikers, e-bike users or leisure riders benefit from the high mileage. Oil-stained or rusty chains are a thing of the past.
Clean: No lubricant means no accumulation of grease and dirt.
Smooth and silent operation: no metal-to-metal contact of the chains.
Light: The whole system weighs less than a standard bicycle chain.
No elongation: Belt does not need to be re-tensioned or replaced.
Self-cleaning: CenterTrack and MudPort profiles are specially designed to repel mud, dirt, snow or other contaminants.
Consistent efficiency: The drive boasts a long service life compared to that of a conventional chain, where efficiency is significantly reduced by wear or dirt.
Installing a Gates Carbon Drive Belt Drive requires a specially-made frame, therefore we strongly advise against modifying a conventional frame.

Belt tension
For optimal function of the Gates Carbon Drive System, correct belt tension is essential. Common tension adjustment systems include inclined or vertical dropouts, horizontally sliding dropouts (not recommended by Gates) and eccentric bottom brackets.
There are several common methods to measure the tension of your Carbon Drive system, most notably the Eco Tension Tester, the Spring Tension Tester and the Gates Carbon Drive Smartphone App. Gates Carbon Drive tension recommendations are as follows:

  • Off-road and urban – soft and even pedalling style: 40-60 Hz (35-45 lbs)
  • Off-road and urban – strong and hard pedalling style: 60-75 Hz (45-53 lbs)
  • Internally geared hubs: 35-50 Hz (28-40 lbs)
  • Tandem: 60-65 Hz (45-48 lbs)
  • Shimano STEPS: 35-45 Hz (28-35 lbs)

To calculate the correct belt length, the Gates Carbon Drive Belt Calculator is available on the Gates Carbon Drive homepage.

Models:

1188 mm:

Teeth:
108
Manufacturer Number:
11M-108T-12CT

1221 mm:

Teeth:
111
Manufacturer Number:
11M-111T-12CT

1243 mm:

Teeth:
113
Manufacturer Number:
11M-113T-12CT

1265 mm:

Teeth:
115
Manufacturer Number:
11M-115T-12CT

1298 mm:

Teeth:
118
Manufacturer Number:
11M-118T-12CT

1320 mm:

Teeth:
120
Manufacturer Number:
11M-120T-12CT

1342 mm:

Teeth:
122
Manufacturer Number:
11M-122T-12CT

1375 mm:

Teeth:
125
Manufacturer Number:
11M-125T-12CT

1408 mm:

Teeth:
128
Manufacturer Number:
11M-128T-12CT

1430 mm:

Teeth:
130
Manufacturer Number:
11M-130T-12CT

1452 mm:

Teeth:
132
Manufacturer Number:
11M-132T-12CT

1507 mm:

Teeth:
137
Manufacturer Number:
11M-137T-12CT

1573 mm:

Teeth:
143
Manufacturer Number:
11M-143T-12CT

1661 mm:

Teeth:
151
Manufacturer Number:
11M-151T-12CT

1738 mm:

Teeth:
158
Manufacturer Number:
11M-158T-12CT

1826 mm:

Teeth:
166
Manufacturer Number:
11M-166T-12CT

1848 mm:

Teeth:
168
Manufacturer Number:
11M-168T-12CT

1914 mm:

Teeth:
174
Manufacturer Number:
11M-174T-12CT

Contents:

  • 1 x Gates CDX belt
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “GATES CDX BELT”

Your email address will not be published. Required fields are marked *

Scroll To Top
Close

Shopping Cart

Close

Shopping cart is empty!

Continue Shopping

en_USEnglish