RAAW MOUNTAIN BIKES MADONNA V2.2 29″ FRAMESET W/ FOX FLOAT X2 2POS FACTORY

The Madonna V2.2 29″ Frameset by RAAW Mountain Bikes combined with a Fox Float X2 air shock

The RAAW Mountain Bikes Madonna V2.2 frame is complemented here by a Float X2 shock from Fox Racing Shox and is an optimal basis for a durable, robust enduro bike. With a fine response reminiscent of steel shocks, the shock allows adjustment of high- and low speed compression and rebound damping and also features a 2-position lever for quick adjustment on the go. A matching Acros headset is also included. Compared to its predecessor, the Madonna V2.2’s seat tube and related interfaces such as the bottom bracket, rear triangle and shock mount have been revised. RAAW have also developed their own thru-axle system that increases stiffness and prevents the axle from loosening while riding. Proven features that make up the bike’s character have been carried over from its predecessor. A special feature is the variation of shock and rocker: the 60 mm version (sizes S, M, L) for 60 mm rear shock stroke with the resulting higher gear ratio is optimal for a lighter rider weight up to 90 kg. The 65 mm version (sizes L, XL) for 65 mm rear shock stroke, on the other hand, is best suited for riders weighing 90 kg or more. This way, everyone can enjoy the same level of riding fun. All pivot points and end caps are sealed, the shock mount is also equipped with ball bearings. The brake mount is a separate component and saves you from using additional adapters. With inserts, you can also adjust the chainstay length according to your wishes. To make maintenance easier, all cables are routed externally. The Madonna V2.2 allows you to not only descend the mountain with verve, but also experience good climbing characteristics uphill. The balanced geometry facilitates a centralised riding position combined with smoothness and predictability. On top of that, your equipment has also been thought of: two threads on the top tube are for attaching accessory bags, so that you always have the most important items with you, even without a backpack.

Note: The rear shock is not pre-assembled.

Specifications:

Application:

Enduro

Wheel Size:

29″

Travel:

160 mm

Size:

S, M, L, XL

Front Triangle Material:

aluminium (6066-T6)

Rear Triangle Material:

aluminium (6066-T6)

Linkage Design:

four-pivot rear frame

Rear Shock:

Fox Racing Shox Float X2

Technical Information:

Wheel Standard:

12 x 148 mm (Boost)

Axle Type:

12 mm thru-axle

Seatpost (Ø):

31.6 mm

Seatpost Clamp(Ø):

34.9 mm

Headset:

ZS44 – ZS56 (top to bottom)

Steerer tube rec.:

1 1/8″ – 1.5″ tapered

Recommended Fork Axle to Crown:

570 mm (S), 580 mm (M, L, XL)

Recommended Fork Travel:

160 – 170 mm (S), 170 – 180 mm (M, L, XL)

Bottom Bracket Standard:

BSA

Shell Width:

73 mm

Chainstay Guide:

ISCG 05

Brake Mount:

disc PM8 (direct mount 203 mm)

Front Derailleur Mount:

not possible

Rear Shock Eye-to-Eye Measurement:

205 mm

Rear Shock Stroke:

60 mm (S, M, L), 65 mm (L, XL)

Rear Shock Mounts:

Trunnion Mount

Bottle Cage Mounts:

1

Approved For:

Rotor Size (max.):

203 mm

Tyre Size (max.):

29 x 2.6″

Chainrings:

1x

Chainring Size (max.):

1x 36-tooth

Note from the manufacturer:

Frames with Rocker 60 are designed for 60 mm rear shock stroke, and are recommended for a rider weight up to 90 kg. The Rocker 65 requires 65 mm of rear shock stroke, and is recommended for a rider weight of 90 kg or more.

Features:

• stiff thru-axle connection prevents twisting and is extremely stable
• revised seat tube made of a single hydroformed tube with fewer welds, thus increasing stability and reducing weight
• optimised, two-part shock mount at the bottom for flexible damping and improved power flow
• bottom bracket design allows for better shock clearance for sizes S and M and higher ground clearance for sizes L and XL
• rocker design and connection improved with bearing in rocker instead of frame
• externally routed cables for easy maintenance without chafing or rattling
• internal cable routing for seatpost in the seat tube possible
• low maintenance thanks to completely sealed pivot points
• also possible to mount a 180 mm brake rotor thanks to the exchangeable brake mount with disc brake adapter for 180 mm
• adjustment of the chainstay length with inserts for dropouts possible
• dirt-resistant frame design
• two threads on the top tube for attaching accessory bags
• 1 bottle cage mount on the down tube
• maximum insertion depth for seatposts 200 mm (S), 225 mm (M), 250 mm (L), 275 mm (XL)
• Boost chainline
• drivetrain-neutral suspension also for intermediate sprints
• sensitive, smooth suspension due to high transmission ratio at the beginning of the spring travel and use of cartridge bearings
• evenly decreasing transmission ratio with 20% progression at the end of the spring travel

Geometry:

(based on a fork axle to crown of 570 mm (S) / 580 mm (M, L, XL))
S:

Recommended Height:

158 – 170 cm

Stack:

621 mm

Reach:

430 mm

Seat Tube Length:

395 mm

Effective Top Tube Length:

573 mm

Head Tube Length:

100 mm

Chainstay Length:

440 mm

Wheelbase:

1197 mm

Bottom Bracket Height:

335 – 340 mm

BB Drop:

35 mm

Seat Tube Angle (effective):

72°

Seat Tube Angle (virtual):

72.7°

Head Tube Angle:

64.5°

M:

Recommended Height:

167 – 180 cm

Stack:

643 mm

Reach:

455 mm

Seat Tube Length:

420 mm

Effective Top Tube Length:

596 mm

Head Tube Length:

115 mm

Chainstay Length:

440 mm

Wheelbase:

1233 mm

Bottom Bracket Height:

335 – 340 mm

BB Drop:

35 mm

Seat Tube Angle (effective):

72°

Seat Tube Angle (virtual):

77°

Head Tube Angle:

64.5°

L:

Recommended Height:

177 – 190 cm

Stack:

657 mm

Reach:

480 mm

Seat Tube Length:

445 mm

Effective Top Tube Length:

617 mm

Head Tube Length:

130 mm

Chainstay Length:

445 mm

Wheelbase:

1269 mm

Bottom Bracket Height:

335 – 340 mm

BB Drop:

35 mm

Seat Tube Angle (effective):

74°

Seat Tube Angle (virtual):

78.3°

Head Tube Angle:

64.5°

XL:

Recommended Height:

186 – 199 cm

Stack:

670 mm

Reach:

505 mm

Seat Tube Length:

470 mm

Effective Top Tube Length:

645 mm

Head Tube Length:

145 mm

Chainstay Length:

450 mm

Wheelbase:

1305 mm

Bottom Bracket Height:

335 – 340 mm

BB Drop:

35 mm

Seat Tube Angle (effective):

74°

Seat Tube Angle (virtual):

78.2°

Head Tube Angle:

64.5°

Contents:

• 1 x RAAW Mountain Bikes Madonna V2.2 frame
• 1 x Fox Racing Shox Float X2 Shock (not pre-assembled)
• 1 x Acros ZS44/28.6 – ZS56/40 headset
• 1 x RAAW Mountain Bikes thru-axle
• 1 x RAAW Mountain Bikes PM8 disc brake adapter
• 1 x RAAW Mountain Bikes seatpost clamp
• 1 x protective foil
• 11 x zip ties